RamperPro WIFi Dongle

Delivery time:

2-3 days

Subtotal	15,00 €
21% VAT	3,15 €
Price	18,15 €

Add WiFi support to your RamperPro1 and RamperPro2. This makes it possible to review the progress and images of your RamperPro on your smart phone, tablet or laptop.

Manufacturer:

Edimax

Product Details

Features

The RamperPro offers an App that you can access via WiFi. This WiFi dongle is all you need to get access to this new and exciting feature. Just connect your smartphone, tablet or laptop to your RamperPro1 or RamperPro2 and you can see the images that your camera is taking at full resolution.

Contents

You get:

1 x Edimax EW-7811UN WiFi dongle

How to use it

Minor RamperPro update released. Version 3072

Submitted by andre on Mon, 03/05/2018 - 19:59

We have just released firmware 3072 for all RamperPro models. This firmware contains no new features, but it includes support for a few new camera models:

Change log

The new Sony Alpha α7r III is now supported by the RamperPro! This is the first Sony alpha camera that can store the images on the internal memory card of the camera. That was not the case with previous Alpha camera's where the RamperPro had to download the RAW files to the RamperPros' memory card
Support for the Canon 6D Mark II

Read more about Minor RamperPro update released. Version 3072

How to use the Sony Alpha α7r III with the RamperPro

Submitted by eveline on Sat, 03/03/2018 - 22:39

The new Sony Alpha α7r III is now supported by the RamperPro. The great news about this camera is that the camera is able to store its' images on the memory card of the camera. That is a huge improvement because previous Sony camera models didn't have this feature. That meant that the RamperPro had to download the images from the camera. But that is not required anymore on the Sony Alpha α7r III! This means shorter intervals since the images can now stay on the camera itself. Note: The Sony Alpha α7r III is supported in RamperPro firmware 3072 and higher.

Read more about How to use the Sony Alpha α7r III with the RamperPro

RamperPro firmware 3071 is available - Bardenas Reales release

Submitted by andre on Sun, 12/17/2017 - 20:45

We made it. Just before the end of this year. Here is a new exciting firmware release for the RamperPro time lapse controller. This release is available for all models of the RamperPro.

Read more about RamperPro firmware 3071 is available - Bardenas Reales release

Minor RamperPro update released. Version 3070

Submitted by andre on Mon, 03/27/2017 - 20:48

We have just released firmware 3070 for all RamperPro models. This firmware contains a few bug fixes and preliminary support for the Nikon D5

Change log

Added support for the Nikon D5.
Fixed USB triggering for Nikon.
Enhanced the easy setup mode. ISO ramping is automatically setup in all possible situations.
Show a detailed message when the user has setup the RamperPro manually in expert mode and when ISO ramping values are not entered correct. We don't recommend to use expert mode; this is only for experienced users.
Trigger two motion control devices via ext1 and ext2 even when only one camera is connected. This makes it possible to use a slider with its' own controller and a pan/tilt head with its own controller. These two devices are now triggered at the same time by the RamperPro after an image is taken.
Fixed a bug where the unit could crash when USB triggering was used and when USB connection with the camera was lost. This can happen when the cameras' battery is empty for example. Enhancement of the sunrise performance.

Read more about Minor RamperPro update released. Version 3070

Minor RamperPro update released. Version 3069

Submitted by andre on Tue, 02/21/2017 - 23:42

We have just released firmware 3069 for all RamperPro models. This firmware adds support for some newer Canon cameras.

Change log

Added support for the Canon 1DX Mark II
Added support for the Canon 5D Mark IV
Fixed an issue where images were not shot in USB trigger mode when the trigger cable was also connected
Provide better feedback when the camera cannot be triggered to take a picture
Fixed several bugs

Read more about Minor RamperPro update released. Version 3069

Smoothing 2.0 - New deflicker algorithm for the RamperPro

Submitted by andre on Thu, 09/01/2016 - 10:25

Smoothing 2.0 algorithm applied on a 20 stops sunrise from ElysiaVisuals on Vimeo.

Read more about Smoothing 2.0 - New deflicker algorithm for the RamperPro

RamperPro firmware 3066 is available for Sony A7 shooters

Submitted by andre on Fri, 07/22/2016 - 23:13

We just released RamperPro firmare 3066 for the RamperPro3 only. This fixes an issue where Sony A7 cameras wouldn't always ramp properly. This issue was only existing on the new RamperPro3. RamperPro1 and RamperPro2 users don't need to update to 3066.

Read more about RamperPro firmware 3066 is available for Sony A7 shooters

New RamperPro setup wizard

Submitted by andre on Thu, 06/23/2016 - 00:23

New RamperPro setup wizard from ElysiaVisuals on Vimeo.

Read more about New RamperPro setup wizard

Minor RamperPro update released. Version 3062

Submitted by andre on Thu, 06/16/2016 - 21:48

RamperPro firmware 3062 has been released. You can now setup the WIFi name of your RamperPro and a few issues are solved. What is included:

Read more about Minor RamperPro update released. Version 3062

Introducing the RamperPro3 - WiFi/Bluetooth - App support

Submitted by andre on Tue, 06/14/2016 - 20:57

The ElysiaVisuals team is happy and proud to announce the next evolution of the RamperPro, the RamperPro3. The best time lapse controller just got better. We have added WiFi and Bluetooth support. This makes it possible to use the App functionality without the need to use an additional WiFi Dongle.