RamperPro

The new RamperPro firmware 3045 supports the Panasonic GH4 and ND filters

Submitted by andre on Mon, 01/19/2015 - 19:53

We have just release the latest 3045 firmware for our unrivaled RamperPro time lapse controller. This new firmware now includes full support for the mirror less Panasonic GH4 camera. This is the first non Nikon or Canon camera that can be used with the RamperPro. A big advantage of the GH4 is that is doesn't feature a mechanical shutter. This makes this camera ideal for time lapse photography because there is no shutter wear.

The RamperPro goes on tour in the United States and Canada and it can visit you too!

Submitted by andre on Sat, 08/02/2014 - 23:17
We just boxed a RamperPro with every additional item that you can think of. Camera cables for Nikon and Canon, a battery pack, DragonFrame adapter, a native RamperPro stepper driver controller that fits right into your eMotimo slider motor and more. This box will be shipped throughout the US and Canada to shooters who are serious in testing the RamperPro. You can be one of these shooters if you:
  • Are willing to send the complete contents through to the next shooter,
  • Test the RamperPro within a 3 week time span.
  • Write a review on your blog.

RamperPro tutorial - How to create stunning sunsets with the RamperPro

Submitted by andre on Sat, 08/02/2014 - 20:59

There are a lot of settings that you can tweak to ramp a sunset with the RamperPro; but there are only 5 settings that you should at least evaluate. All other settings will work right out-of-the-box for you.

RamperPro tutorial - how to create flicker free timelapse movies

Submitted by andre on Wed, 07/30/2014 - 08:27

RamperPro feature overview

Submitted by andre on Sun, 07/27/2014 - 11:07

StageR powered by the RamperPro

Submitted by eveline on Tue, 07/22/2014 - 19:35

Here is a very short sneak preview of the motion control features of the RamperPro:

StageR powered by the RamperPro from ElysiaVisuals on Vimeo.

The future of the RamperPro - Motion Control

Submitted by andre on Wed, 07/09/2014 - 21:23

ElysiaVisuals is happy to announce some exciting developments that further enhance the RamperPro's capabilities. We have developed a very small stepper motor add-on to the RamperPro that you can use to control your slider directly from the RamperPro. All RamperPro controllers are equipped with an accelerometer. This makes that the RamperPro can be used as a joystick. You can setup the stepper motor by tilting the RamperPro. Just set the start and end position of your slider and you are good to go.

The RamperPro now has a new highly accurate light sensor algorithm

Submitted by andre on Thu, 06/26/2014 - 18:03

We are very happy to announce a new highly advanced light sensor algorithm for our RamperPro timelapse controller. We already included a few important modifications in the previous firmware; but we were able to improve the firmware even more. The new light sensor firmware is very capable of really following a sunset by combining the new light sensor algorithm and the histogram analysis of the RamperPro.

RamperPro firmware 3025 is available - La Palma release

Submitted by andre on Thu, 06/19/2014 - 21:59

Today we released a new major firmware version for our advanced RamperPro timelapse controller. We took the RamperPro to La Palma where we had the ability to really test the unit to the edge of its' capabilities. The results of these tests have resulted to the "La Palma" release of the RamperPro firmware. We have also added many requests from our customers. Please keep sending us feature requests!

We now have a powerful battery solution for the RamperPro

Submitted by eveline on Thu, 06/19/2014 - 18:33

ElysiaVisuals is now offering a powerful 5V USB battery kit that you can use to power our RamperPro timelapse controller. We have tested several solutions and we have choosen this battery because it is powerful and affordable.

Pages