Blog

RamperPro firmware 3037 is available - Dumaguete release

Door andre op wo, 10/14/2015 - 17:31

We just release a major new firmware, version 3037, for our RamperPro advanced timelapse controller. This is the first release that includes full support for our stepper motor add-on for the RamperPro. You can now control you slider directly with the RamperPro because the RamperPro is now a motion controller and an advanced camera controller.

RamperPro tutorial - How to install the embedded firmware

Door andre op wo, 10/14/2015 - 10:00

It has never been so easy to upgrade the internal embedded firmware of the RamperPro. You don't need a PC or Mac to do this because all the required software can now be installed directly by the RamperPro advanced timelapse controller.

RamperPro tutorial - How to install the embedded firmware from ElysiaVisuals on Vimeo.

The new RamperPro firmware 3045 supports the Panasonic GH4 and ND filters

Door andre op ma, 01/19/2015 - 19:53

We have just release the latest 3045 firmware for our unrivaled RamperPro time lapse controller. This new firmware now includes full support for the mirror less Panasonic GH4 camera. This is the first non Nikon or Canon camera that can be used with the RamperPro. A big advantage of the GH4 is that is doesn't feature a mechanical shutter. This makes this camera ideal for time lapse photography because there is no shutter wear.

The RamperPro goes on tour in the United States and Canada and it can visit you too!

Door andre op za, 08/02/2014 - 23:17
We just boxed a RamperPro with every additional item that you can think of. Camera cables for Nikon and Canon, a battery pack, DragonFrame adapter, a native RamperPro stepper driver controller that fits right into your eMotimo slider motor and more. This box will be shipped throughout the US and Canada to shooters who are serious in testing the RamperPro. You can be one of these shooters if you:
  • Are willing to send the complete contents through to the next shooter,
  • Test the RamperPro within a 3 week time span.
  • Write a review on your blog.

RamperPro tutorial - How to create stunning sunsets with the RamperPro

Door andre op za, 08/02/2014 - 20:59

There are a lot of settings that you can tweak to ramp a sunset with the RamperPro; but there are only 5 settings that you should at least evaluate. All other settings will work right out-of-the-box for you.

RamperPro tutorial - how to create flicker free timelapse movies

Door andre op wo, 07/30/2014 - 08:27

RamperPro feature overview

Door andre op zo, 07/27/2014 - 11:07

StageR powered by the RamperPro

Door eveline op di, 07/22/2014 - 19:35

Here is a very short sneak preview of the motion control features of the RamperPro:

StageR powered by the RamperPro from ElysiaVisuals on Vimeo.

The Dynamic Perception StageR is now in stock

Door andre op zo, 07/20/2014 - 22:24

The exciting DynamicPerception StageR motion blocks are now in stock at ElysiaVisuals.com. We are going to add this product to our online store in the next few days.

The StageR can be controlled with the DynamicPerception MX3 controller when you use the EZ Swap DC motors. It is also possible to control the StageR directly with our RamperPro advanced timelapse controller. The RamperPro is able to control one stepper motor axis (quad axis support will be available in October).

The future of the RamperPro - Motion Control

Door andre op wo, 07/09/2014 - 21:23

ElysiaVisuals is happy to announce some exciting developments that further enhance the RamperPro's capabilities. We have developed a very small stepper motor add-on to the RamperPro that you can use to control your slider directly from the RamperPro. All RamperPro controllers are equipped with an accelerometer. This makes that the RamperPro can be used as a joystick. You can setup the stepper motor by tilting the RamperPro. Just set the start and end position of your slider and you are good to go.

Pagina's