ElysiaVisuals is happy to announce some exciting developments that further enhance the RamperPro's capabilities. We have developed a very small stepper motor add-on to the RamperPro that you can use to control your slider directly from the RamperPro. All RamperPro controllers are equipped with an accelerometer. This makes that the RamperPro can be used as a joystick. You can setup the stepper motor by tilting the RamperPro. Just set the start and end position of your slider and you are good to go. The image on the left shows a slider that we are directly controlling with the RamperPro stepper motor add-on.

We have also developed a tiny RamperPro to DragonFrame adapter. The RamperPro can act as a remote control for DragonFrame. This makes it possible to use the advanced camera control capabilities of the RamperPro combined with advanced multi-axis motion control as it is offered by DragonFrame.

Both the stepper motor add-on and the DragonFrame adapter are connected directly to the Ex1 and Ext2 ports of the RamperPro. The adapters will be supplied included all the required cables.

The stepper motor add-on and the DragonFrame adapter electronics are finished; all required software is also available. We will start production very soon from now, but please feel free to contact us if you are interested in these options. We might be able to serve you!